Going to get the big block hustler tomorrow

[coosaridgerider]

Please tell me you that your going to get some video Roy, or at least a bunch of pics. You gotta show that monster off!!!!

Yeah buddy,I will try to get some video.It has a much quieter exhaust system on it now but still sounds nice.I got the loud header but when i put it on it would pop and not run as good so i took it back off.

[kghills]

Ok i pulled the trans out today and it was the clip that holds the shaft in came off.I had to take the trans completely apart to get to the clip.I lucked up on the broken bolt by using a left hand drill bit.I added 2 braces from the top of the trans to the frame to help hold it in.I took it for a test run and everything looks good know.I'm taking it to great American park in Auburn Alabama this weekend if anyone would like to go I would love to have someone to ride with.

Any pictures of the top braces? Mine has one top brace on the right hand side running to the back cross member. I assume it is factory. After reading about yours I am going to check all my bolts. Keith.

[coosaridgerider]

I went to take pictures but the batteries where dead.This is not my machine but twin brother.I plan on adding the rear braces but his front ones look the same.

[kghills]

I found some bracing on another members build that looked simple yet effective.



I checked my bolts last night and all is good...for now.

Keith.

[brushcutter]

Here is a link to a thread on bracing up your t-20. In it you will find several applications dealing with holding the transmission in place.

http://www.6x6world.com/forums/hustler-atvs/9044-t-20-bracing.html

[coosaridgerider]

Thanks brushcutter,I'm taking the hustler to the great American park in Auburn Alabama for the rockfest event this saturday if anyone would like to go.

[coosaridgerider]

100_0333_00.MOV - YouTube

[coosaridgerider]

[coosaridgerider]

My stepson Brandon got this shirt made for me in Panama city.

[Mike]

Cool shirt. Your video is showing up as private though so we can't see it.

[coosaridgerider]

Ok it should be fixed.Thanks mike.

[brushcutter]

Sweet! What tires are you running? They seem to do pretty good!

[coosaridgerider]

Sweet! What tires are you running? They seem to do pretty good!

It has 25" rawhidelll and i don't like them.They swim slow in deep water and barely move in water/mud but on hard packed and loose mud they do ok.I had about an hour of video but i am having problem trying to post and may have lost some of it.

[brushcutter]

rawhideIII huh? I had some 22's on my 950 for a few months, some folks like them but I thought they sucked. Then I throwed a set of 25" mudbugs on and that removed any doubt that on my machine they sucked. Can't really say much about swimming because the bugs didn't swim very good either. At least not on my 950 anyway. But I thought that the 25 rhIII was a well liked tire... maybe you've just got too much awesome cosmic power in that big block...

[coosaridgerider]

This is a picture of a member[gsell] that i met at the great american park. I only got to talk to him and his family right before i had to leave.