Max IV Parts

[Beemerman]

I bought a 1990s Max
How would I know how old it is?
Where do I go to get kit for all axles ie: seals & bearings?
Chain
Transmission gasket bearings and seals?
Thanks:

[thebuggyman1]

The serial# will tell the year. This thread will get you close http://www.6x6world.com/forums/max-a...tml#post135044 Or you can call the factory and they will tell you exactly what it is.
For bearings, try Buffalo Bearing Buffalo Bearings Inc. The seal is in the bearing, so make sure you buy the triple seal bearings (R3), 206-20-R3 for the 62mm ($13 each) and 207-20-R3 for the 72mm ones ($18 each)
For chain, stick to high quality chain like Diamond or Tsubaki brands. Ebay often has good prices on Tsubaki, but I found the Tsubaki masters cheaper at Grainger Industrial Supply - MRO Supplies, MRO Equipment, Tools & Solutions
For the t-20, the seals and O-rings can be bought at Motion Industries, but the case half seals are onle available from Recreatives.

[Mike]

Hi Beemerman, welcome to the site. For the age, get the serial number stamped into the metal plaque on the dash and then check out this thread: http://www.6x6world.com/forums/max-a...tml#post135044 It will give you an idea of the year. If you need a more exact answer than that you can call the factory and they will tell you the year: Amphibious Six-Wheel Drive All-Terrain Vehicles: MaxATVs - Call 1-800-255-2511

You can also get all of your parts from them or your local max dealer.

Edit: Buggyman not only beat me to the answer by four minutes but he also had much better suggestions.