bearing cages

[swamp donkey]

Anybody know what the going price on a set of bearing cages for a max 2 is?

[CBass]

Buffalo Bearing, you can get a set for about $60 to $90. around $12 to $15 each

[swamp donkey]

good deal and they just bolt on to the out side flange? If someone has time post a picture for me. THANKS

[jpswift1]

Buffalo bearings only sells the bearings and flanges, not the bearing cages. You have to get the cages directly from Recreatives. They only have the 72mm ones for newer Maxes, not the older 62mm ones.

[tattooman]

J.p. did they ever make them for early 90s maxll?

[jpswift1]

J.p. did they ever make them for early 90s maxll?

They did make them for the 62mm bearings on the older 90's Max II but unfortunately they don't have them in stock anymore. Your best bet is to try and find some used ones or make them.

[msafi65]

The list price is about $90 for the fronts and $75 for center and rear not including bearings or retainers. Full list installed on a vehicle is now$745. New only available for the 72mm bearings. hope this helps out

[Bavaria]

here you can buy it for a cheep price

1 1/4" 2-Bolt Flange Bearings UCFL 206-20
This are the outer Bearing . Unfortuneately this one are ungreaseabile.

http://www.primebearing.com/SAPF206-20-1-1-4-Pressed-Steel-Round-3-Bolt-Flange.html

When your cages with the grease zerk are OK, you can buy this here and use your old cages

http://www.primebearing.com/UC206-20-1-1/4-Insert-Bearing.html

This is a adress for all the europeans, how read this in the future, You can buy the bearings in Great Britain. No Tax and cheep shipping costs.
this is one place of many other, you can buy

http://members.ebay.de/ws/eBayISAPI.dll?ViewUserPage&userid=boltonbearings