Max 6x6 designer must have been really aggravated

[snake stomper]

so I bought a new chain, and 2 new adjusters for the rear of my max 2. Trying to get the bottom nuts on the adjusters is crazy. Please tell me there is a trick to this. Lol

[Tomo]

hi
Use a allen head bolt, head facing upwards
Washer under the head and the nut
when u place the bottom nyloc nut on the under side of adjuster/ brkt use super glue to retain into ring spanner
Use super glue on other washers etc if u feel the need
The allen head bolt allows u to use a " T " drive wrench
Tighten with wrench whilist holding spanner on nut

tomo

[Noel Woods]

The front units are not too bad, r rear more complex, and you had better be a contortionist for the left rear. I frankly hope that I don't have to switch mine out again. The back aches and bruised knuckles and cut fingers took awhile to heal up.

[snake stomper]

That's for sure. They must have put those on and then put the frame in the body, and stood back and had a good laugh like it was the best joke ever. Iam gonna give the super glue a try.