Tweet
Have owned my Max Iv for a few years and never experienced this problem. Went to drive out of the shop and when wanting to turn, the right lever seems to have no response in either forward or reverse. Any guidance anyone could provide would be appreciated. T20 Bad?
-
-
Most likely you have broken a shift pin on the diamond shifter. If you will search the site for T20 shift pin in the transmission forum you will find lots of good information with a few photos. If that is what the problem is, it's an easy fix. Remove the two bolts on the right side of the T20 that hold the diamond shifter down. Remove the linkage attached to the diamond shifter. Then pull the diamond shifter out. Check the pin on the bottom and see if it is there. If it is, see if it is sheared, worn, broken, etc. -
Thanks for your help!Comment
Comment