Announcement

Collapse
No announcement yet.

Our Project

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Our Project

    I bought a 1998 Max IV a little while ago for my 18 year old son. After he swamped our Yamaha 550 for the second time and filled the motor up with fine silty mud I decided not to repair it. $4,000 for a motor rebuild sent him walking (not riding).
    He found this max on a farm with a for-sale sign on it so I bought it for $500 and we're fixing it up. My chances are much better that he won't sink the max. We have disassembled it and I took the frame to the sand blaster yesterday. We are going to apply POR-15 to all the parts under the floorboard. I have all new bearings, from Buffalo Bearings. The axles are in a machine shop being repaired., I damaged 2 getting them out. I have all new chain and idlers. I ordered the first shipment of stainless steel hardware today from McMaster Carr. It was soooo rusty, and hard to disassemble that I'll use stainless where I can. Well, it's a project. I'll post some images after I find a place to host them. Most forums let you upload pictures directly from your computer to the forum, but not this one.

  • #2
    Cool. I'd like to see pictures of your project. Hopefully your son won't swamp this one.
    Stand for the Flag. Kneel for the Cross.

    Comment


    • #3
      Sounds like you have the plan. Photos,click Gallery tab then look down rt side of screen,you will see "upload photos" button. You can make albums ,etc once you've uploaded them.
      sigpic

      Comment


      • #4
        Sounds like a great time for both of you, will keep you both occupied and probably slow him down a tad once completed.

        As JoeMeg wrote the gallery on the site is a great place for you and all of us to enjoy your progress and outcome, it is also a great resource for picture info .
        sigpic

        My new beer holder spilled some on the trails - in it's hair and down it's throat.
        Joe Camel never does that.

        Advice is free, it's the application that costs.

        Comment


        • #5
          take it easy in the stainless steel hard where it is real easy to gall up the threads when installing with power tools ( we do it all the time at work on the food grad s.s. bolts )

          Comment

          Working...
          X