Announcement

Collapse
No announcement yet.

greasing fitting/maintance

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • greasing fitting/maintance

    ok guys what is the secret to greasing the inside bearing on a max IV? I have a very difficult time getting the grease gun on the front and rear fitting. Also are the front pressed in, can they be changed to threaded angles. Any help would be great.

  • #2
    Originally posted by snappy View Post
    ok guys what is the secret to greasing the inside bearing on a max IV? I have a very difficult time getting the grease gun on the front and rear fitting. Also are the front pressed in, can they be changed to threaded angles. Any help would be great.
    the new ones come with a 90 deg fitting pressed in . when i take my II apart. i'm going to press the grease zerk out and thread it and put new 90
    s in robbie .
    1999 max 2 18 b&s 22 tires custom . new max iv 23 k 26 i/n tires brown . ht cable promark winch . new toy 1972 attex st400 400ccjlo and she will be bad . ( the frog ) if it don't float with out you getting wet . don't bring it ! R.I.P sage rogers 4 11 09 . you can't fix stuped !!!!! raceone 3 .)

    Comment

    Working...
    X