Jack shaft sprocket fix

[sixbisix]

This is my first 6x6 and as usual it has turned out to be more work than expected. Are the bushing available to fix the problem seen below? Also it seems the bushing housing is flared out at the end so even a new bushing wont fit correctly. This damage also caused the jack shaft itself to bend. Thanks.

sprocket2.jpgsprocket1.jpg

[gus marrone]

Get the correct bushing first then take it to a machine shop and have them true it up and put a sleeve in it then press in the bushing .or have them put a larger flange on the end and fit it for a bearing . Good luck