Help with part identification (bearing)

[Gilby]

Hi All,

Getting around to cleaning up the inside of my '93 Max II and it looks like i have some bearings going out. Can anyone help me with what part number i'm needing? I'm looking at max6x6 and see several listed but not sure exactly what this one is.

IMG_0205.jpgIMG_0203.jpg

[tattooman]

The picture you posted is of a jack shaft! If you need bearings just call Buffalo bearing in New York. Tell them that the people at 6x6 world had you call. You need 62mm bearings with a three bolt flange. That is for axle bearings. Jack shafts have bushings on each end. Any hardware store will sell bushings. Try tractor supply. I just bought a couple of them, three or four bucks each! I hope that is the information you were looking for!

[Gilby]

Thank you sir! That was quite informative. I apologize for posting yet another thread on this, now that i know that its a jackshaft i was looking at, plenty of posts show up in searches.

[tattooman]

Glad to help!