Winter Tires/Track to Summer Tires

[Moldman]

Again thanks for all your help. I will be removing track and tires for inspection and greasing bearings. My questions are as follows: 1.) do I need to remove spacers to install summer tires? and 2.) How many grease fittings should I be looking for when doing a complete greasing. Any help is deeply appreciated.

[tbone9]

You do not need to remove the spacers however it will narrow up the machine and help it swim better if you do. As far as grease fittings there should be three per axel. Two outside the tub and one inside per axel. Hope this helps.