Tweet
New batt is in I've moved the machine 10 ft one day then another 50 ft to the barn everything was off, key, lights etc went back a couple days later to a dead batt as soon as the jump box was on it started right up. Yes I loosened the neg and pos connections before I jumped it and redid them thinking it could be a bad connection. I'm open to opinions. Did a year 2000 max have key switch problems???
-
-
You have a draw. Do you have a radio remote control winch control? I find most of them will draw a battery down in a few days. Possibly a bad voltage regulator going to ground. Look up testing for a parisitic draw. It has to test well under 50 mili amps to keep charged for more than a couple months.Comment
-
Did the heated cable switch get knocked on?Originally posted by Delduck View Postsigpic
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.Comment
-
No heated cable on the machine. The motor is brand new have you seen that from a voltage regulator on a new motor? I guess anything is possible.Comment
-
Charge the battery and do a amp draw test with a multi meter. I have found even though everything is off if you dont disconnect the battery there will be a draw over time.sigpicComment
-
My max has been parked since June and I moved it the other day no problem. I dont keep any battery minders or anything on it just the negative disconnected.sigpicComment
Comment