Argo 25x12x9 on Max ll

[Chiefdiesel]

Looking for something different besides the Aqua Torques 25's on my Max ll. Anybody running the Argo 25x12x9 on a Max ll. I currently have the Argo 24x10x8.

[Reconrokon]

Looking for something different besides the Aqua Torques 25's on my Max ll. Anybody running the Argo 25x12x9 on a Max ll. I currently have the Argo 24x10x8.

Did you have to modify the tub at all to get the 24" tires on it? I will be putting new tires on my Max II soon and want to go with the biggest tire possible without modifying the tub. RR

[Noel Woods]

I have run the 24" Argo tires on a Max2 without having to modify the tub. I remember there was clearance left over but I didn't have a set of 25" Argo tires to experiment with on the machine. The 24"s performed well though in the mud, and swam like a fish. In fact it felt like I had an outboard motor pushing me across the lake.

[Chiefdiesel]

No modifications for the Argo 24's. I want an aggressive mud tire if possible.

[Mike]

Are you talking about the Carlisle tires? If so, they will not fit. Check out this thread: http://www.6x6world.com/forums/max-a...es-max-ii.html

The 25" Rawhide III tires will fit if you get the wider 12" version. That's what I'm running on my Max II.

[Chiefdiesel]

24x11-10 Kenda Bear Claws

[Chiefdiesel]

Sorry for the rotated pics!

[Reconrokon]

The tires look good. I have a couple questions because I will need tires soon.

Have you tried these tires in water (how well do they swim?)

Did you have to do any modification to get them to fit?

[john swenson]

hey chief....the tires look really good and you should really enjoy them in the busco mud come april !! my wife ruth really like those orange wheels, the same as my front ones on the half track max 2 highboy. i have a picture she took , so i will get her to post it . have fun.... later , johnboy va.

[Canadian_Zuk]

The tires look good. I have a couple questions because I will need tires soon.

Have you tried these tires in water (how well do they swim?)

Did you have to do any modification to get them to fit?

I ran Kenda bear claws on my Max IV when I 1st got it. They worked well in mud, were harder to skid in high traction surfaces and did not swim at all.

[Chiefdiesel]

Thanks, the wheels fit without any mods, actually, I'm thinking about replacing these with 25x12.5-10 tires because the offset of the rim gives more room from the tub. They work very well in mud and will bite aggressively on hard pack and downed trees. They swim slow, but exit very well when the banks are wet with grass. I run 1 psi and the ride is decent. I wanted a more aggressive mud tire than the "all around" Argo 189. On a side note, these tires swim better at a lower rpm, but cant compete with the Argos.