maxII

[itdc1]

Hey guys just got a max II that needs alittle work, I have a couple of questions. It seems that when im riding the max likes to bear left esoecially going down hill does something need to be adjusted to correct this and how. Also when i want to turn in reverse it seems that in order turn i need to hit the gas more then i want to in order to turn do i need to adjust the trany its a t20 could it be the band inside. one more question where can i get a roll bar for it.

Thanks Daniel

[Rockram]

I'm new to the Max world myself. I will address the rollcage question. You can order one from RI or fab one yourself. I have been looking here and have seen some awesome work. I have the equipment to build a cage so I was looking at others ideas'. I have a plan in mind now to put it on paper and buy the steel. Just hit the search button on rollbar or rollcage and you'll get quite a few. As for the turning it sounds like it needs some adjustment. Like I said I've only had my MaxIV for about a month. Good Luck and welcome.

[rdr]

Hey guys just got a max II that needs alittle work, I have a couple of questions. It seems that when im riding the max likes to bear left esoecially going down hill does something need to be adjusted to correct this and how. Also when i want to turn in reverse it seems that in order turn i need to hit the gas more then i want to in order to turn do i need to adjust the trany its a t20 could it be the band inside. one more question where can i get a roll bar for it.

Thanks Daniel

hi dan check your tire pressure, make shure that all are the same 3 lbs a pleanty . also what year is your max . could be that one of the center axel sprockets has been changed from the old 22 teeth to a 23 . teeth to .eather will cause it to pull to one side .tire press for shure .. you might have a band out of adjment . not hard to fix .look under tanny part of the forums . mike has a great rebuild section .. rool bars are not hard you can orded it from rec or build your own and . muffler shop can bend it for you . welcom to the site robbie .