Tweet
New to the 6x6 world need help figuring out how to remove bottom seat cushion and floor board assembly.
-
-
It's a lovely chore involving pulling up on the seat and also pulling the sticks back as you clear the parking brake. Some profanity required the first time or two... -
Milkman thx for advise it seems like its attached in the center rt in front of the sticks wondering if its wedged under some sort of mount.Comment
-
shouldn't be. there is a pin just back and left of the sticks that may have a clip in it. Once you get it out, most people cut the seat portion separate from the rest just above the shifter slot. that makes life a lot eeasierOriginally posted by Hawkeye View PostA well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.Comment
-
after years of hassling getting my max 2 floorboard out up over the sticks , i cut mine in half crossways.. right thru the middle of the stick holes . now it's a piece of cake to get the seat part out , then the front part out . they are still just as sturdy as one piece . hope this helps . johnboy va.Comment
Comment