Tweet
On a 780 with a 1-3/16" belt will the belt come to the top of the primary? I know my other machines with 1-1/4" belts it does but not sure on a 1-3/16".
-
sigpic -
It comes pretty close to the top:
-
Would you say about 1/4 from edge or closer?sigpicComment
-
Post a pic Mikesigpic
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.Comment
-
20190330_081608.jpg20190330_081630.jpg20190330_081807.jpg
Here's some pics of my setup. You can see the wear line on the drive sheave. It measures 3/16 from the outer edge. I measured my belt width and its exactly 1-3/16.
Hope this helps. Let me know if you need anything else. Mine is easy to get to.Comment
-
That is EXACTLY what I was looking for. My dads Max IV goes to the same point and I wasn't sure. I changed all my machines to 1-1/4" belts and they go all the way to the edge. Thank you.sigpicComment
Comment