Easy way to change the fluid in the t20?

[smokin cigarettes]

anyone have a link on this?

[liflod]

Install ball valve and hose nipple in place of drain plug. Lift front of machine as high as it will go with winch. Attach hose to valve and route close to the drain hole in the lower hull. Place container under body drain hole.

[Mike]

Search is your friend: http://www.6x6world.com/forums/max-a...my-t-20-a.html

[smokin cigarettes]

Did it today, piece of cake. Took 10minutes.

[turvuren]

Here's an idea to drain with machine level. I take a cheap siphon-the plastic one with tubing- feed it up through drain plug hole in body. Take a smooth path to fill plug, Shove plastic tubing in till it hits bottom. Now with siphon bulb at ground level, squeeze and hold finger over tip as bulb rebounds. With a few pumps you should see fluid start coming. Put bulb in drain pan and come back later- much later! This is the only way I have found to drain my attex fully