max2 axel bushings

[cwk]

Hey guys put in all new bearings but need to replace the brass bushings in the ends of the axels. How much do these cost and where to get them? thank's

[coosaridgerider]

Call RI at 1-800-255-2511

[cwk]

Hey thanks for the info. I found some at local tractor parts dealer.

[bigmandengo]

i believe RI wants like $8 a piece for them and you can find them almost anywhere else for like $0.50 a piece

[06chops]

axle bushings

I just did them on my max II I went to a hardware store and got them cheep just take a 7/8 tap and thread it in the old bushing and take the tap and put it in a bench vice and tap down on the axle to get the bushings out on some of my axles i had to heat them up a bit to get the bushing out but wait til the axle cools down to put the new bushing in i learned the hard way also take a block of wood and use that to hammer on to install the new bushing or a press works too