Fishing with your Max

[blazenron]

Well I was able to get everything I need for My Max It now share's my Boat's fish finder Now I can see whats going on with the fish beneath me, I got a great Deal on a 46 pound thrust Minn Kota trolling Motor that should help getting around more quietly and that is mounted to a board that I made up for the mount and last It now has a working bilge pump
Check it out,

[LarryW]

Looks good! That should help you pull in those asian carp!

[blazenron]

Fishing setup Pictures

2010_0327fishmax0005.jpg2010_0327fishmax0002.jpg2010_0327fishmax0007.jpg2010_0327fishmax0015.jpg2010_0327fishmax0010.jpgMy set up for fishing

[blazenron]

If your going to Mount a Fish finder Like I did I will show you how I mounted the transducer with out drilling, Basically I had come across a GPS mount that you lock and stick onto your windshield of your car now in my case I had only one screw hole on my transducer mount so I screwed it into the plastic part of the GPS mount this is were you would put the auctual GPS unit. Now what I did as far as the Body of my MaxII I glued a piece of sheet aluminum metal with Gorilla Glue because the locking suction cup will not stick to the max plastic body, now you can lock and stick your transducer to the out side of your 6x6 and remove to protectect your transducer from the elements during trail riding I will post pictures tomarrow after the glue is dry

[lewis]

Very nice set up! Catch some big ones. I caught one at Busco without a rod. The fish jumped into the Avenger. Maybe you will have the same luck.

[blazenron]

Thanks lewis Thats pretty cool to have a fish Jump right in

[blazenron]

Transducer follow up pictures

DSCF0002.jpgDSCF0004.jpgDSCF0005.jpgHere are my Transducer pictures