Tweet
what belt do i need for a 95 max II with a 18 horse briggs and stratton vanguard? i need a model number or a name and model number
-
-
1 800 255 2511 rec has then press 4 and jay will get it . robbie1999 max 2 18 b&s 22 tires custom . new max iv 23 k 26 i/n tires brown . ht cable promark winch . new toy 1972 attex st400 400ccjlo and she will be bad . ( the frog )
if it don't float with out you getting wet . don't bring it ! 
R.I.P sage rogers 4 11 09 . you can't fix stuped !!!!! raceone 3 .) -
haha ok thank you yeh i called them i was just seeing if there was a belt i could get in town cuz i need one for this weekendComment
-
Recreatives #15252AA belt is 44 and 3/4 Inches X 1 and 3/16 inch wide I havent found an exact replacement good luck.Comment
-
The spare that came with my Max II was numbered 15252AA as well.It was 1 3/16" wide all right but was less than 44" long.The one running on it was of a different number but was exactly 45 5/8" long and was a bit narrowed but not worn out.The 15252AA was too tight at minimum adjustment.Put it in gear and away you went with no throttle.I replaced with a Dayco HP 3003 which is 44 7/8" long and 1 3/16" wide but even at minimum adjustment it was a workable improvement over the 15252AA belt but still is too tight,shifts desperately hard etc.,creeps in gear . That 15252AA number is not a Dayco or Carisle number but is made by one or the other of them,it must be a custom RI number after manufacture.I have long abandoned any hope of getting a perfect fit belt and though advised to contact RI,it was RI who sent the 15252AA belt which wasn't even close to long enough.Comment
Comment