2001 Max II pulls to the right

[Killer-B]

My max ii pulls hard to the right at higher speeds. Tires are at 3.5 psi. Chains are snug.
Still pulls rt. Any ideas?

[racerone3]

have you measured the circumference of the tires? that makes a bigger difference than pressure. also check the brakes on the front axles and see if the right side is dragging. with the machine jacked up (all 6 tires off the ground) check to see if the right side has more resistance when trying to turn the tires by hand. perhaps a bad bearing is causing drag somewhere.

[Mike]

racerone3 gave some good advice which is usually the problem (different circumferences of tires even at the same pressure) but if you will use the search too there are already a lot of threads on this topic that will help you out. Here are a couple to get you started:

http://www.6x6world.com/forums/max-atvs/13723-1994-max-ii-pulling-one-side.html

http://www.6x6world.com/forums/max-atvs/11905-few-problems-my-max-iv.html

Good luck.

[rdr]

My max ii pulls hard to the right at higher speeds. Tires are at 3.5 psi. Chains are snug.
Still pulls rt. Any ideas?

count the teeth on ur cent axel sprocket jackshaft on the center axel . . the old ones were 21 teeth the new ones are 22 makes a difference if ur tires are right got to be sprockets. robbie

[Ronaldlewis]

you said it pulls hard to the right ?? do you mean it wanders to the right or does it seem like the brakes are on on that side ??