Tweet
The first time I replaced the bearings in my Max II, I took pictures for the how-to article. Now that it was time to do it again, I tried to video and narrate as much of the process as possible. I added this video to our bearing replacement article found in the how-to section here: How to Replace Bearings in a Max II
As a disclaimer, I am a novice myself when it comes to this and there are many members here that are much more knowledgeable than I am on the subject. This is just my method and there are many other ways to approach this. It may not be 100% accurate however it should go a long way to, at a minimum, show anybody out there that is hesitant to do this themselves, just how easy it is.
While this is specific to my Max II, the basic process will also apply for a lot of other six wheelers out there. This video covers several topics during the process including replacing bearings, flanges, chain, axles and sprockets. If you question anything in the video or have any additional questions feel free to start a new thread here on the site and someone will chime in. If this helps just one person I will be happy.
As a disclaimer, I am a novice myself when it comes to this and there are many members here that are much more knowledgeable than I am on the subject. This is just my method and there are many other ways to approach this. It may not be 100% accurate however it should go a long way to, at a minimum, show anybody out there that is hesitant to do this themselves, just how easy it is.
While this is specific to my Max II, the basic process will also apply for a lot of other six wheelers out there. This video covers several topics during the process including replacing bearings, flanges, chain, axles and sprockets. If you question anything in the video or have any additional questions feel free to start a new thread here on the site and someone will chime in. If this helps just one person I will be happy.
Comment