Max IV Wiring Diagram

[dubose]

wiring

Check the wires going into the starter. Recently I had to epoxy the plastic end bell because it broke. The starter would work sometimes and not others. This fixed my issue.

Thanks, i found the problem. I was not getting ground on selnoid

[team222badbrad]

Thanks, do you have any ideas on why no starter action when turning key or touching booster cables to starter.
Thanks

Check the wires going into the starter. Recently I had to epoxy the plastic end bell because it broke. The starter would work sometimes and not others. This fixed my issue.

[dubose]

Thanks, do you have any ideas on why no starter action when turning key or touching booster cables to starter.
Thanks

[dubose]

Mike,
I have a Max 4 and it sarted fine this morning and run for 5 min. I went back to start it and nothing happened. I have 12 volt to starter. I put jumper cables directly to starter but starter will not engage. I put screw driver accross selnoid and nothing. The winch is connected to selnoid and will not work. I can move wires at selnoid and winch will work sometimes. Also, lights do not work but I can move wiries at selnoid and get lights to come on but starter still does not engage.Is starter locked up or is selnoid bad. There is a box on side of engine with wires coming out. What is this box.
Please send wiring diagram to bdubose@bellsouth.net
Thanks,
Bill

[team222badbrad]

Hope this helps.

[msafi65]

I had to leave home for family mater. When I get back to my computer I'm sending the files to be posted. Thanks for your patients

[team222badbrad]

Would like a copy of wiring diagram also please.
I have a 2001 Max IV with a BS Vanguard 18 hp.
Thanks, Jon.

What are you guys needing to know? My max partially apart at the moment so it would be an easy time to get some pictures for you.

[david browning]

Would like a copy of wiring diagram also please.
I have a 2001 Max IV with a BS Vanguard 18 hp.
Thanks, Jon.

[neffer]

hi! i just bought a max iv, with a kohler magnum 20 motor. and i was wondering if you guys could get a wiring diagram for me??? Thanks

[Dan67]

Wiring Diagram

I posted some Briggs wiring diagrams in my Hustler thread http://www.6x6world.com/forums/hustl...html#post95059. I hope these are helpfull.

[fmints]

same here, i would like it also. thanks

[chappyinchobee]

Could I possibly get a copy of those wiring diagrams as well?

[dgiumen1]

Could I also get a copy of the wiring diagram.
I have A 1996 Max4 with a Briggs & Stratton Vanguard 18 hp V-Twin engine.
The wiring looks like a rats nest.
Thanks Dave

[msafi65]

If you can wait until the 15th I'll be back at my computer. I have all the wiring diagrams in e-file.

[Badassbanshee]

A Briggs & Stratton Vanguard 18 hp V-Twin
Thanks