Tweet
i have a older max II and when i hit the starter it will pause then go like it has lag. even when i give it some throttle to start the engine will stop turning over. is it normal or is it a bad starter or bad starter solenoid? Any imput is appreciated thank you.
-
i have a older max II and when i hit the starter it will pause then go like it has lag. even when i give it some throttle to start the engine will stop turning over. is it normal or is it a bad starter or bad starter solenoid? Any imput is appreciated thank you.
-
Could be...or could be low battery voltage.....or could be a bad connection. Start by checking all connections are clean and tight, then test the battery. Last you can take the starter to a rebuild shop and they will test that for you. -
Dont forget a "Wicked" starter wire as well. Ive had thsi on vehicles, they pull alot of voltage outta the battery but not all at once, kinda like a build up....then WAM they kick in.Originally posted by thebuggyman1 View PostI have officially caught the 6-wheel-sickness!!
"If your gonna be dumb, you better be Tough!"
"I have done so much, with so little, for so long, that I'm now capable of doing practically anything with virtually nothing...."
BUY AMERICAN..or...BYE AMERICA!!!Comment
Comment