Announcement

Collapse
No announcement yet.

Scrambler Questions

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Scrambler Questions

    I have a Scrambler that I am working on getting running for summer. First, it is a twin stick? Most of the Scramblers that I have seen online have steering wheels. So does that make it a rare model? Second, I need help on the lines. They are cracked/broken in places. Where can I get replacement lines and fittings.

    A little more info on it. It is red and white kind of looks like a lady bug. The fiberglass is in good shape. It still has the rear seat cover. It has reverse that works great. it had a 14 solid state Tecumseh engine that was shot, so I am replacing it with a 11hp clone motor that I have. I have already welded in a steel plate to remount the new engine. I should taken pics of it before I tore it apart.
    Tags: None
  • #2
    Sticks were an option as well as reverse. The tubing can be replaced with 3/16" nylon brake line tubing for go karts.
    Acta non verba

    Comment

    • #3
      I found more problems today. The right side stick master cylinder is locked solid. Every time I move a line it breaks. NAPA says that I can but 100 foot roll for fifty dollars. I am going to the tractor supply to see if they sell smaller rolls. Also what is the easiest way to bleed the lines. I have a pressurized spray canister that I can run brake fluid thru? Will that work?

      Comment

      • #4
        The only line that didn't break was the one that someone replaced with copper tubing.

        Comment

        • #5
          If the master is above the caliper open the bleeder and gravity should do it.
          If you use the pressure canister i would pump it into the caliper
          with the cover off the master to bleed the air.

          Comment

          • #6
            Just to let you know , In case you need the piston seals for your steering and brake cylinders , I got them from o-rings .com . You will have to identify them by I.D. and O.D. sizes but they have them all. What type of reverse do you have , is it the starter motor ring gear type ? I want to put reverse in my Scrambler and am trying to learn about them . Take care ,jtw

            Comment

            • #7
              Hello jtw, i have a 4 sets scrambler. The electric reverse works with a American Bosch Polaris Snowmobile Starter 5698340-M030SM.
              Regard from Mexico

              Comment

              • #8
                Thanks for the reply on the starter . I'll do some research to see if I can get an idea on mounting one in my machine. And Regards from Alpine ,N.Y.

                Comment

                Previous template Next
                Working...
                X