Tweet
Hello my name is John I'm from Ohio and I currently have a Lockley Wrangler 295 in very nice shape due to the unavailable part for the motor I did a motor swap of a Rotex 340cc snowmobile motor and once again I ran into another problem 3 years down the road I broke a chain and also it ate all 3 sprockets any ideas? Can someone get all 3 sprockets and a chain or what steps can I take. If you can help direct me or have any ideas I will listen too anything you got. Because I love this machine but when its broke its a pain due too being rare and the low amount of parts available thanks for looking at my forum and hopefully I can get this back up and going with your help thanks again !!!
-
-
Measure or count the teeth on the old sprockets. Do you have a fwd/rev transmission in it or just a jack shaft. The originals had double #40 chain, but you can swap over to #50 chain and sprockets. -
Yes it's a jack shaft and I'm going too try too make it work with 50 chain I will report back with results laterComment
-
Let me know what size sprockets you have and what you're buying. The Lockley I have does not have any sprockets on it and I will need to buy them when I get around to that project.Comment
Comment