Amphicat bodies:Brand new!

[Amphiman1]

i'm looking into production of Brand new poly or fiberglass for amphicats.If there is enough interest....i'll start the production of 2 styles of them. let me know if you are interested on this forum. i'll have to have made 20 at a time.. costs will be reasonable not over priced
Let me know...

[Matt O.]

Hi Steve,
Do you have the molds? If so We can use some of my plastic sheets and my former to save on cost and we can run less than 20. We can also run a few colors. Let me know.

Matt

[Amphiman1]

amphicat bodies

Hi, Thank you Matt for your offer, but i'm all set here..... for both processes complete bottoms, tops and engine covers should be around 950.00 we figure buyer pays shipping...

[NIGHTMARE73]

I’d like to get a new body for mine! its my 1st 6x6 and I didn’t know better , I tied a ratchet strap across the body and ratcheted it down to a trailer to get her home ,, well I ratchet the body and now when it rolls it burned a hole where the lt front tire rubbed through the body do to the body being cracked ,,,,

[Amphiman1]

Amphicat new bodies

hi which do u think would be better? fiberglass body, or a poly body? by the way,,, a fine choice of 6x6!! do me a favor. private im me what u think one might be worth...top/bottom and engine cover

I’d like to get a new body for mine! its my 1st 6x6 and I didn’t know better , I tied a ratchet strap across the body and ratcheted it down to a trailer to get her home ,, well I ratchet the body and now when it rolls it burned a hole where the lt front tire rubbed through the body do to the body being cracked ,,,,

[charlevoixboy]

Fiberglass, easy to repair. There is a reason they make boats out of it.

[charlevoixboy]

Also takes more stress and bumps. Look at the Terra Tiger, Almost unbreakable.

[riotwarrior]

Well being a glass man I would strongly encourage fiberglass as it is so simple to repair.....heck even in the field if needed.

My muscateer is glass and I am pleased with that. I will be doing some mods in the future.

Good luck with it.

[NIGHTMARE73]

Any up dates on these body's , Im thinking of rebuilding my 6x6 and 1st thing it needs is the body.. let me know please !
thanks

[Amphiman1]

new bodies

There has to be a definate number of pepole to buy them first, before they will/can go into production...at least 20....

[tattooman]

Body

I will take one fiberglass or poly!!!!

[NIGHTMARE73]

How Much You Thinking Of Charging?

[Amphiman1]

bodies

It's not up to me, it is up to the people who make them, plus shipping. i'm guessing .......800 to 950.00? remember , there might be blemished bodies too, hehe
I going for a black one and a light red one..

[Amphiman1]

Amphicat bodies....

I have found some one who would make 1 piece fiberglass bodies (the top and bottom)... any one interested?

[NIGHTMARE73]

And How Much $$$ We Talking ?