SOLO 750

[Richie the solo 750]

My Rare SOLO in the snow and some puddles check it out

[lewis]

Nice!!!!

First one that i have seen. Keep posting these on this machine.

Loved the video
Lewis

[racerone3]

very cool! never seen one of them. can you post some still pics and some info on the machine?

[Mike]

Thanks for posting the videos. There was another guy on the site with one. Maybe Marc? Anyway, there are a few brochures in the brochures section here: http://www.6x6world.com/forums/brand...olo-750-a.html

[6X6]

Hi, Richie
Hmm, from the brochure, looks like a T-20. Very cool machine.

[LarryW]

Great machine, I do believe it is Marc who has one. Feel free to post as many videos and pictures.

[philipatmaxfour]

Rare Machine--Running Fine

Richie the Solo 750. very very cool

[Richie the solo 750]

more work than play

The solo has been a royal pain in my ass i love it but my back does not ive got more wrenchin hours into this machine than that are on the hour meter ive had to completly make a new tranmisson bracket from scratch very complicated thanks to a water jet that made the peices and a machine shop for the turnbuckles the last time i had the solo out i sheared and shaft in the tranny back to the machine shop i go rich i will posts some pics ASAP

[Richie the solo 750]

your trany (t-20?)

very cool! never seen one of them. can you post some still pics and some info on the machine?

I am very curious about your trany it is very simular if not identicle on the inside wondering if u replacment part source i have a broken shaft in myn and am lookin at an expensive machine bill due to the splines required rich

[jpswift1]

If indeed the transmission in your Solo 750 is a T-20, I have an extra main shaft for you. There were two different shafts used, the early ones were supported with another bearing a the very end of it, while the later ones didn't have that extra bearing support. I think this was changed around the mid 1970's. If you could take a picture of yours and post it up I could see if the one I have would work for you.

[Richie the solo 750]

Tranny

here are a few pics the longer shaft is in decent conditon the peice i need is the one that is sheared off i havnt attempted to remover sproket and seal hope this pics will help i can send more detail drawings with dimentions if u like

[Solo-750-Stefan]

Hi! Nice to see another one of the 86 Solos is still alive. I also have 2 of them in green Color.
Best Regards
Stefan

[Voll Rakete]

Hi Richie,

do you still own the SOLO 750?
I know it's been a while since the last post ;-)

I own no. 55, and at the company we still have an almost unused no. 62... would be very interested to get in contact with the other SOLO 750 owners.

Regards,
Felix from Germany

[Tomo]

hi ,
The shaft with the sprocket is the output shaft on the clutch side [that's why its hollow]. These are available thru Recreative Industries .They r available with or without sprocket . 99.9 % they r all the same thru the years .
tomo