Announcement

Collapse
No announcement yet.

Terra Tiger (new to me)

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Terra Tiger (new to me)

    I just brought this baby home today. I am excited to start working on it. It has a 350 cc Polaris engine, fairly new tires (with fenders) and one small chain problem (I think easy to solve). One thing I may have to have done is relining the steering clutches. Any suggestions as to where I could have that done? That any any other suggestions would be welcome.

    Thanks
    Chris

    [ATTACH]3108[/ATTACH]
    Tags: None
  • #2
    Welcome!

    Good to have you on the site. Nice looking machine. Someone will chime in shortly with some info for you.

    Still want a KID

    Comment

    • #3
      [QUOTE=camcgrath;41108]I just brought this baby home today. I am excited to start working on it. It has a 350 cc Polaris engine, fairly new tires (with fenders) and one small chain problem (I think easy to solve). One thing I may have to have done is relining the steering clutches. Any suggestions as to where I could have that done? That any any other suggestions would be welcome




      I would try the local NAPA store. They might be able to tell you where to go.

      Comment

      • #4
        steering clutches

        Hi Camcgrath, I'd lose the box on the back. Could cause a backflip going up a hill. Like the fenders. Richards Relics.com carries the tiger steering clutches but he could be expensive. But he's got them and you need them. Good Luck Mike D

        Comment

        • #5
          Box on the back

          The box on the back was actually for a hay bale, so I will be pulling it off, first thing.

          Comment

          • #6
            Welcome! I like the fender skirts as well! May have to put something like that on ones of ours. We use to sell Terra Tigers (have 6 at this time) and are in process of having a lot of parts made for them. We just had a set of clutches relined at a local Industrial supply company out of a different material. We want to install them and test before we offer them. Will let you know how they do. It will be a couple weeks before we can get them installed! Richard at route6x6 has them available on exchange basis and his are great! just very pricey. If you have any questions or need any help on it let us know.


            Jeff

            Comment

            • #7
              tiger clutches...

              you may want to ask mark m what to use, he seems very up on this..

              Comment

              • #8
                JOE M clear your messages
                sigpic

                Comment

                Previous template Next
                Working...
                X