Max 2 jackshafts

[dave phelps]

Ok guys and gals. Looking for a right side if your sitting in the machine jackshaft for old max 2 bushing style or maybe both if you have?
Thank you
Dave Phelps

[garrett1308]

Just looking for the 6 inch or so long 3/4"shaft with two holes in it? I made two for mine a while back, but it is a 2003 machine. Theyre easy to make with a drill press, or PM me and send me the dimensions of yours so I can make sure it will work for you.
Can make the left side's as well if you want to get me dimensions for it.

[dave phelps]

Just looking for the 6 inch or so long 3/4"shaft with two holes in it? I made two for mine a while back, but it is a 2003 machine. Theyre easy to make with a drill press, or PM me and send me the dimensions of yours so I can make sure it will work for you.
Can make the left side's as well if you want to get me dimensions for it.

I am looking for the hollow shaft with the sprockets welded to the tube. My buddy busted one last weekend and prefers to buy one over tryin to fix. The solid shaft I think is ok.
Thanks

[ARGOJIM]

count the teeth, I may have something.

[dave phelps]

count the teeth, I may have something.

Ok Jim. It
Still my buddy's that was at ash and he's gone for the weekend so I will get back with you as soon as I can. I do know that machine is a 74 year model but that's all I know
Thanks again
Dave

[dave phelps]

count the teeth, I may have something.

Ok Jim. It's 27 teeth on the 50 chain and 17 on the 60 chain. Let me know please if ya would.
Thanks a lot
Dave

[ARGOJIM]

Check tonight when I get home from work.

[dave phelps]

Check tonight when I get home from work.

Thanks Jim! he took out last night and sent me a pic it twisted the tube off inside of the sprocket so this may be able to be rewelded on to the sprocket and live to ride again. I will keep you posted on this.
Thanks again
Dave