Made a press today.

[Beeman]

I started out today wanting to work on my attex. Got sick of hammering the pressed on bearings off the 1st generations axles so I ended up making a press. I want to drill a large hole in the Square tubing and weld in a pipe going through it. Have the pipe welded in flush. That way I could use it for what ever and be able to put a 1" axles through the pipe hole to press bearings. I threw some paint on the cross beams but I will wait until it warms up to paint it better.

[smog]

now you can use a press-brake die to bend brackets, tires guides etc etc

it's how I made the tires guides for my rubber tracks

[LarryW]

I started out today wanting to work on my attex. Got sick of hammering the pressed on bearings off the 1st generations axles so I ended up making a press. I want to drill a large hole in the Square tubing and weld in a pipe going through it. Have the pipe welded in flush. That way I could use it for what ever and be able to put a 1" axles through the pipe hole to press bearings. I threw some paint on the cross beams but I will wait until it warms up to paint it better.