Ashtabula, OH Parts Swap Meet June 19-22 2014

[amphibious drew]

First time on board...just purchased an older Max II with a 14 hp vanguard twin.....By changing the carb I get it up to 16hp...is it difficult to install? Let me know how much your asking. I have relatives in Ohio who could pick it up or maybe I could pay you to ship

It's a straight bolt on replacement. $70 plus shipping or you or whoever can pick it up in Ashtabula Ohio during race weekend or near Akron Ohio as my family all lives near there and I am often in that area.

[KatiKat]

I am looking for a Max II windshield and roll bar. Let me know how much!!

[jpswift1]

I too will be bringing a bunch of Max and Attex parts. I don't have a Max II rollbar or windshield at this time, but I do have a Max IV windshield. I also have the factory 1990's Max IV cargo rack mounts, a set 6 of 9" Recreatives 5 bolt Max rims, a Comet 94C 4 stroke drive clutch for a 1" shaft, Max II 4 stroke engine mounts, for both early and late model Max II style frames, a complete factory Max II 4 stroke exhaust system from a Briggs Vanguard equipped Max, and tons of other odds and ends.

[thebuggyman1]

I have a set (6) of 22" rawhideIII"s with excellent tread mounted on "K-lock" rims. $600
a MaxIV windshield off a 1988.
And a exhaust manifold for a 16hp Briggs off a 2001 MaxII w/external muffler. Price negotiable.

Send me a PM if you are interested in anything and I'll toss them in the trailer.

[hydromike]

I still have this decent set of Argo Standard Tracks for sale if anybody's interested. I can have them down at Ashtabula, but I'll only load them up if prompted by an interested party.
$500 takes them home. Please PM me if interested.



Original description here: http://www.6x6world.com/forums/parts...ale-600-a.html

[racerone3]

ok, ok, looks like I'm coming. I will have a very full truck and trailer (not even sure where the beer cooler is gonna ride), but If anyone needs any parts let me know and I will see if I can squeeze it in.

[racerone3]

seat belts for your racer.

Have 5 sets of racing seat belts at $50 each. Also a Tecumseh from a coot. Vanguard and Kohler carbs. Jlo starters. assorted Briggs and Kohler tin/ sheet metal. Attex brakes. Tank trainer tub corner guards (fit any attex). Hustlers axles and sprockets from a 900. MaxII rear sprockets and jackshaft assembly's.

[egoperf]

I'm bringing a 295 jlo with clutch, a good set of max ii jackshafts, rear, and center sprockets, and a set of max 3 1/4" wheel extentions

[Don]

I'll bring some two-stroke electric starters, recoil starters, Attex brakes, headlight grommets, A wide profile Comet 102C set up for a G50B, and whatever else I find lying around.

[Matt O.]

I'll bring some new black Attex lower body's, tires, rims, t-20 parts, belts, ect. If anybody needs any Max parts let me know and I can bring them along to save on shipping. I can't wait to go treasure hunting and see what old crape I can drag home this year!!! The Mudd Puppy took the cake last year! There is a new song out called I like Old S*it by Miranda Lambert. Wendy says that's my theme song.

Matt

[ARGOJIM]

I'll bring some new black Attex lower body's, tires, rims, t-20 parts, belts, ect. If anybody needs any Max parts let me know and I can bring them along to save on shipping. I can't wait to go treasure hunting and see what old crape I can drag home this year!!! The Mudd Puppy took the cake last year! There is a new song out called I like Old S*it by Miranda Lambert. Wendy says that's my theme song.

Matt

Howbout a Tricat3?

[amphibious drew]

Ok I got some more stuff figured out that I am bringing. I have a poly and a metal Attex gas tanks both are the old school cap style. Other Attex parts include: shift linkage, t-20 linkage, cup washers, axles, sprockets, break assembly, a wild wolf body, a colt body and frame, and probably some stuff I forgot about. I also have a Max IV: windshield, body, frame, and possibly some sprockets and axles (solid not splined). I have Max II axles, sprockets, break assemblies, and maybe even a frame or two. I will have a project buffalo truck there if anyone is interested(body and frame) as well as a project gotcha. I also have some random balloon tires and other tires. Possibly some 26x12x12 terra tires on rims of anyone is interested. Oh yeah, and I have several (5 maybe) supported shaft t-20's that we can open up to inspect and put new half gaskets and o-rings in prior to purchase so you actually see what you are getting. I may even have a u-channel t-20 or 2 that we could do the same with for anyone. Oh yeah, and a Hagen transmission for anyone interested in building a counter rotating machine.

[jpswift1]

Here's the picture of the Buffalo Truck Drew and I are selling. It has bearing cages, a good T-20, nice body, good tires and wheels, and a factory winch mount, but no engine. On top of the list of things Drew mentioned, we also have a Max II floor pan, Max IV factory cargo rack mounts, some Attex body bands (1st and 2nd generation), Max IV gas tank, Max IV steel headlight bezels, early style Max II/Max IV winch mount, Rule factory Recreatives winch, there are some JLO 295 engines and Mikuni carbs for them, Attex mufflers, 6 polished aluminum 12" 4 bolt ATV wheels, and tons of other miscellaneous Attex and Max parts.

[liflod]

Stuff for sale, can deliver to Ash.
Amphicat frame, transmission and axles.
Terra Tiger body with axles.
RIM upper body, some holes.
Cuyuna 400 twin, 6 bolt heads
Fiberglass Sidewinder body with axles
Lockley Wrangler, needs frame and engine.
Rotax 440, needs rings
Arctic cat 340 engine
JLO 297 engine

[ARGOJIM]

Looks like I'm bringing the ST/295, a 30mm comet 94c, the hirth 211 440 50.00, maybe an older t-20 from hustler 885,Team clutch off GatorHPX, John Deere 340 with clutch and a Muskin TriCat3 70-72 3 wheeler needing engine. 8 inch hubcaps, plenty 5.00 each, keeps mud and snow from packing in rims.
If someone is interested in Hustler I need to know, don't want to put 800 miles on it it doesn't need.

Also have a Alsport tracker the needs a deposit to come, no engine.

I'll be in the northeast corner.