Idle control adjustment screw

[Tomo]

hi
If adjusting the screws a little does not work refer to the LINKS SECTION engine manuals . The briggs twins have a governed idle system, to set this properly u need an infared / briggs tachometer and the manual . Follow the procedure for your carby .

tomo

[ArgoSteve]

Remove the black plastic cover under air filter on drivers side, 1/4 turn screw is there.

there's 2 screws, which one??? And how do i set it? All the way in and then 1 1/2 turns out??? Pic would be nice.

[ArgoSteve]

What kind of machine do you have? The idle adjustment is generally on the back underside of the carb.

I have the 16 hp b&s. it's a 93 Vanguard.
There's 2 screws on the right side, say when your sitting on the machine.

[thejunkman]

Dont forget its a governed idle if he is still running the governor

[ARGOJIM]

Remove the black plastic cover under air filter on drivers side, 1/4 turn screw is there.

[Twizted1]

What kind of machine do you have? The idle adjustment is generally on the back underside of the carb.

[ArgoSteve]

Where is and how do you adjust it. I have to play with the choke to keep it idling. I took off top of carb and out all the jets. Fuel filter is fairly new. Gas is about 6 months old. Any suggestions? Thanks

16 hp b&s