Announcement

Collapse
No announcement yet.

JLO 295 with no spark

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    JLO 295 with no spark

    I went to fire up the 'ol Attex with a JLO 295 the other day for the first time in a month or two and I could not get it to start. After determining I had no spark, I purchased another external coil and tried that. I still had no spark, so I do not believe the coil is my issue. Any ideas as to what I should try next?

    Thanks in advance
    -Attex ST/300/D - "The Duck." Family owned since the early '70's
    -Attex ST/300/D- A-stock racer build! (not yet started)
    -Attex 440 Thunderchief Racer (not yet started)
    -Attex ST/400 (not yet started)
    -Hustler 980 BIGFOOT- A work in progress (SOLD)
    -1999 Max Buffalo Truck (SOLD)
    -1989 Max IV - A Max four my kids. (In progress)
    Tags: None
  • #2
    Points, clean and check the gap. It's a pain gotta pull flywheel?
    sigpic

    My new beer holder spilled some on the trails - in it's hair and down it's throat.
    Joe Camel never does that.

    Advice is free, it's the application that costs.

    Comment

    • #3
      Originally posted by ARGOJIM View Post
      Points, clean and check the gap. It's a pain gotta pull flywheel?
      Yes it's a pain, but you can get a small emery board or file in through the holes in the flywheel and get them cleaned and set. At least its not a twin:-)

      Comment

      • #4
        I hope you don't have to replace anything under the flywheel. The singles can be a real pain to remove sometimes. Good Luck!
        Stuck in the seventies- not in the swamp.

        (6) Attex, a Hustler, a Super Swamp Fox, (2) Tricarts, (3) Tri-sports, a Sno-co trike, 3 Dunecycles, and a Starcraft! ...so far

        Comment

        Previous template Next
        Working...
        X