Vanguard throttle linkage

[scubadave]

I have a 14hp Vanguard and the springs/linkage is missing or all bent up on the carb/governor. Does anyone have a decent closeup pic of the carb assembly, so I can straighten it out. The motor runs, but it is very sloppy.

Thanks

[Nubs]

[scubadave]

Thanks Nubs....

[Nubs]

I have the complete linkage setup off that engine in those pictures if that would help Ya out..

[scubadave]

Thanks, not right now. It looks like I have the right parts, including extra springs, but they are in the wrong place. There were 3 different springs on the cam for the governor and it looks like they also used another pivoting arm from a different motor.