Announcement

Collapse
No announcement yet.

Argo magnum not charging

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Argo magnum not charging

    Hi.
    Ive ready The other thread but i dont get my magnum with 18HP kohler to charge.
    I have 41v AC from The stator cables but nothing out from rectifier that is brandnew serialnr 4140310
    I tried a separate ground cable but nothing.
    Please help!!
    And ideas?
    Last edited by svanen; 04-02-2017, 10:01 AM.

  • #2
    With that info I would look at the main battery wire that goes to the center lead on the rectifier. If there isn't battery voltage there it won't charge. It could even be a fuse.

    Comment


    • #3
      Its putting out 13.7volts now.
      We didnt know The regulator needed 12v to funktion.
      One fuse was a part of The problem The other i think was The regulator.
      Thanks amigos!!!

      Comment

      Working...
      X