need to buy mikuni non bolt flange

[micmac]

I'm looking for a site to buy rubber boots / flange/ mounts for mikuni carbs that have the clamps on either end, not the ones with the bolt holes.

I'm looking for a U.S. supplier for these:

SIP Scootershop - Connecting rubber carburetor,

Mike

[jpswift1]

Hey Mike, check out DennisKirk.com - Motorcycle, Harley-Davidson, ATV, Dirt Bike, Snowmobile, PWC / Watercraft Parts, Apparel, and Accessories or Parts Unlimited

[techfx]

Perhaps this is what mine needs... I have to put a nut on the inside to hold the cable in and can't really adjust the throttle cable.

Whipper saw it and thought it was a bit odd too.

[racerone3]

Mike, send an e-mail to Marty : tbirdrotts2@hughes.net this guy helped me a ton with mikuni VM stuff for my racer

[micmac]

Thanks Brian I'll send him an email.

Mike

[micmac]

I found a site that sells what I'm looking for. I haven't purchased from the company yet so I can't vouch for them. It looks like they have a bunch of different applications. Hopefully this might help someone in the same situation.

carb boots marshall

Go to the product picture page to find what you need.

Mike

[fulleraviation]

I might have some for free off of 582/503 Rotax engines from my ultralight days. PM me if interested and give dimensions.

Rut

[bigmandengo]

07-475 - Ski-Doo / Moto-Ski Carb Flange

[Don]

I found a site that sells what I'm looking for. I haven't purchased from the company yet so I can't vouch for them. It looks like they have a bunch of different applications. Hopefully this might help someone in the same situation.

carb boots marshall

Go to the product picture page to find what you need.

Mike

I've used them before and they're pretty good. The service is quick but the prices can be a little high for some things.