Tweet
So I've had my Attex for about a month and a half and have been busy replacing axles here and there as well as the occasional bolt which has broke. Fun right. So here is my question. As I completely ignored the engine working on everything else, I did not notice that there was no air filter in it (trust me I feel like an idiot), however no big deal. I went out and got one yesterday and changed the oil and took it out for a ride. It seemed to top out around 20MPH before, but now its going crazy fast. Does anyone know how fast this thing should go. By the way I also moved the governor spring from the right corner whole to the left corner whole for more tension...am I going to blow the engine up doing this? Thanks guys, this site is great.
-
l like to buy stuff and no I don't do payments! -
If its a Tecumseh OHV 16 then keep it at 3600 or it will be toast in no time.Get a tiny- tach and set it at 3600 rpm,also keep it super clean(Degrease it if it has oil all over it and find the leak.They wont last long if running hot also. -
Thats the one
That would be the engine. Thanks for the help Eddie. I guess I'll look for a tiny tac when I go get a new belt. The engine seems clean on the ouside, but it was running a little hot when I got it. It seems better since changing the oil and such.Originally posted by eddieb1965 View Postl like to buy stuff and no I don't do payments!Comment
-
Which one
I was wrong! After looking at my engine it is not the OHV. Which Tiny Tach do I need for a Tecumseh OH0 16. It seems they make a few and I am unsure if I need the true 4-stroke one or a different version. Also any suggestions on rpm or anything else would be helpful. Thanks for the help in advance.Last edited by amphibious drew; 07-16-2009, 04:34 PM.l like to buy stuff and no I don't do payments!Comment
Comment