Announcement

Collapse
No announcement yet.

How long does a 18 HP Briggs&Stratten motor last?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • solbuilder
    replied
    Chains and sprockets

    Thanks for the ideas.
    So a couple hundred hours is really no problem if maintained, got it.
    I've already passed on the units with rusty chains, and will look at a couple this weekend in Minneapolis with snow tracks. I need the tracks to check the cattle (and have some fun) in the snow. thanks for the help. Bruce

    Leave a comment:


  • smooth_oakislander
    replied
    1995 14hp

    HI- Well i have a 1995 model max-2. It has 14hp briggs vanguard in it. I installed a oil cooler on it when briggs first started offering them. I also installed 3 small fans into the rear of my maxs body which was a great way of removing more hot air out of the inner body. Last time i had my briggs dealer look it over they said it was still like new. It has great compression.its not using oil and doesnt smoke. It's as we all say and that it is how well you maintain a motor is how long it will last. This little hard working motor has many long hours on it. I use my max in hunting hogs as well in search and rescue for missing children and adults. checkout the website and you will see pics of me using it to search for missing persons. CUE Center for Missing Persons Have a good one Smooth_oakislander

    Leave a comment:


  • rdr
    replied
    Originally posted by solbuilder View Post
    How many hours does the B&S motor in an Argo last before it needs to be rebuilt or replaced. I'm looking at some nice Argo models from the 90's with 200-400 hours on them. I see others only a few years newer with 40-100 hours and the owners want lots more money.
    thanks, solbuilder (Bruce)
    hi i have given my briggs hell and it's still going . it has been under water. it locked up this past weekend at busco . let it cool broke it loose put the pluggs back in fired it up . still running . like roger said chains sprocket's overall cond . of the mechine . wheather it has been cared for and been greased . robbie

    Leave a comment:


  • Roger S
    replied
    I'd be more concerned about chains and sprockets than the engine.

    Leave a comment:


  • SiliconTi
    replied
    I'd say a properly maintained engine should be good for 1000-2000 hours, maybe more.

    Leave a comment:


  • How long does a 18 HP Briggs&Stratten motor last?

    How many hours does the B&S motor in an Argo last before it needs to be rebuilt or replaced. I'm looking at some nice Argo models from the 90's with 200-400 hours on them. I see others only a few years newer with 40-100 hours and the owners want lots more money.
    thanks, solbuilder (Bruce)
Working...
X