$50 Super Charger (the strange red button explained)

[Roger S]

Good luck on the plan. I toyed with a blower motor once briefly, with no luck. They make and sell what I'd describe as an electric, bladed inline fan like some of the marine vent fans. This is for cars, draws 50 amps and makes about 1 psi boost. Is for intermittent use only. Well at 50 amps it'd have to be intermittent.

If the carb has an external bowl vent, it needs to be hooked into the pressure.

[brushcutter]

It took a while to build the flanges, worked on it nearly all day Sunday, then had to modify it Monday to fit the new filter. I wanted to go with a K&N conical but they are heavy and the fan housing itself acts as a coupling, also a hole had to be drilled to mount it so that would void the warranty. The K&N would have cost over $60, I only have about $35 in what I'm running now, because I didn't use all the fittings- yet.

[LarryW]

So you are building a electric turbocharger? That is awesome. I love the stuff you do!!

I have seen a production unit somewhere for an automobile. Same idea but with a larger blower.
Found these plans on ebay
ELECTRIC TURBO TURBOCHARGER DIY PLANS SUPERCHARGER : eBay Motors (item 160423262419 end time Apr-17-10 22:09:23 PDT)

Here is a charger and it talks about a cheap $35 unit not performing and that is the one I have seen for sale. Maybe it will work on a small motor better?
NEW ELECTRIC SUPERCHARGER TURBO TURBOCHARGER BOOST PSI : eBay Motors (item 130383048655 end time Apr-18-10 18:49:25 PDT)

[racerone3]

good idea! i wonder how it would do on a 400 JLO? i need a few more ponys for ashtabula this year. we put a 4" blige blower in the intake hose of a mid 90's V6 Mustang, and it made a huge difference! the car was a dog going up hill but when you turned the fan on, you could really feel it pick up.

[brushcutter]

This is not a new idea by any means, and I know there has been discussion about it in the past, but I was talking to the guy that has the HHO setup in his S-10, and he got to telling me about how he is trying to get more performance out of it for the least $$$ possible. He tried what I am about to share with you all and saw a considerable increase with it. So I said to myself: "self... if he did that on an S-10, then what would it do for an 18 hp horrizontally opposed twin" I said that to myself I did. The next time the wife was in Wally World I had her pick up what would be the cornerstone of this experiment. So let's get to it.

Did you know that the fan in the common blowdrier is powered by a 12 volt motor? Well I must say I didn't. But as soon as I got my hands on it, the drier went to the shop for dismantling and to see if it would run off a 12v charger, it did.After taking a few measurements,I went to Lowes and bought a few flexible rubber fittings. I then built a base that would mount to the carb, a flange for the air filter, let me say that the original one didn't allow enough flow, and I could feel almost 0 air movement once everything was tied together before installing it on the carb, which initially caused me some concern. I bought a 2" to 3" and a 1 1/2" to 2"bell reducer and a couple of elbows that haven't been used yet.

So I'll post these now and let's get our heads together on this. I can say that after changing to a new cannister filter there has been a definite increase in performance. Also Noel woods is already thinking about a bilge blower, and I have it on fairly good authority that would be the way to go- WAY MORE CFMs Dang -ain't even had it on a week and I'm already thinking about how to upgrade my upgrade! Ain't that just perfect, oh well enjoy...more to pics come!