Announcement

Collapse
No announcement yet.

oh160 ignition coil

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • oh160 ignition coil

    Hi i am having problems with my coil when i got my argo the coil was burnt out so i put a newer one on and the argo ran awsome till one day some one left the key on and burnt out the coil so i put another coil on and the engine ran great for a month now when the engine gets hot it just up and stops sparking but if u let the engine sit for an hour or 2 to cool down it start 2 spark again and run fine wat could the problem b could the battery i hav in it 2 big and maybe heating the coil up cause the barrery in my argo is a car battery

  • #2
    try disconnecting the kill switch wire from the stator. Run it and see if it stops sparking. If it keeps going, then it's the stator that needs replaced.
    l like to buy stuff and no I don't do payments!

    Comment


    • #3
      ok ill try that and also the engine cover i took it off one day it was running and when i went 2 put it back on it sparked when it made a conection with the head of the engine wat would cause that and the engine was running when i was putting the cover on

      Comment


      • #4
        Your regulator/rectifier is grounded to the cover(i Think),check voltage running,hopefully you didnt fry it! 14.5V max.
        You never know till you try it

        Comment


        • #5
          ok thanks and i put on my old coil that didnt work when i got the argo and now it works fine with no problems

          Comment

          Working...
          X