Announcement

Collapse
No announcement yet.

Scrambler wire diagram needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Scrambler wire diagram needed

    Scrambler wire diagram needed for the ignition switch, regulator, starter solinoid. It needs to be idiot proof, as that is my wireing skill vevel.



    Thanks in advance,

    Brant

  • #2
    You will have to at least post what motor you have. I deleted your other thread in the Hustler forum. We can just post what you are looking for here.

    Comment


    • #3
      Do you have a an 8hp or 12hp or 16hp ohv?
      Acta non verba

      Comment


      • #4
        The Scrambler has the 12hp.
        The Hustler had a 2stroke, but I'm looking for a 4stroke.


        Thanks

        Comment


        • #5
          Here is the wiring diagram for the Marc 12 Scrambler.
          Acta non verba

          Comment


          • #6
            Hi,
            I just got a 6x6 Today, It says scrambler on it and looks like it is from the 70's.
            The engine says Solid State ignition on it and is an overhead valve engine with 2 allen crews holding the valve cover in place.
            There are no other stickers or tags to identify what this is.
            I need help with the ignition on it, all there is comming from the engine is 3 wires that have been cut about 3 inches from the base of the cylender.
            And no cdi box or anything else to hook them to.
            Do you have any idea what thin engine is, and how to excite the Solid State ignition?

            Comment

            Working...
            X