Tweet
I have a Hustler 6x6 with a 440 kohler twin 2stroke. It has a Walbro Carb That was Dissassembled pre-purchase. Soooooo to the best of my abilities i reassembled the carb. it seems OK BUT, there are a few issues. umm does anyone have a assembly diagram so i can verify i assembled this thing correctly and also need to obtain the adjustment settings for this thing. any help would be GREATLY appreciated.
-
I have a Hustler 6x6 with a 440 kohler twin 2stroke. It has a Walbro Carb That was Dissassembled pre-purchase. Soooooo to the best of my abilities i reassembled the carb. it seems OK BUT, there are a few issues. umm does anyone have a assembly diagram so i can verify i assembled this thing correctly and also need to obtain the adjustment settings for this thing. any help would be GREATLY appreciated.
-
To Invent, you need a good imagination and a pile of junk. (Thomas Edison) -
I checked it out, couldnt find anything remotlely like what i have, ill keep pluggin away thogh. Thanks for the infoComment
-
Your best bet would be to replace it with a Mikuni carburetor off a snowmobile. They're much more reliable and easier to tune. A 32 or 34mm one would be best. Do some searching on ebay with those key words and you'll find what you need. The first thing I do with Walboro and Tillotson carburetors is get rid of them."Looks like you have a problem with your 4 wheeler........you're missin' two wheels there"
sigpicComment
Comment