wlabro carb nozzle

[larryf]

Does anyone have a pic of an original carb nozzle i know what the service nozzle looks like but mine doesnt look like it or the original of the pic i have in my manual your not suppose to take them out but didnt know until it was to late its an lmh carb and i also need the part num for the service replacement if mine is the original thanks

[larryf]

This is for a 16 horse tecumseh

[jpswift1]

Some folks with some of the earlier Maxes, Argos, and Attex Tomahawks should be able to chime in on this one since they all used the Tecumseh OHV160.

[spud9slim18]

hi larry i have an 1977 sears mower with a ohv 16. the engine code number is 143.670032. the part number i found is 631942. bad news it is seemingly the only part of the carb that is no longer available.not a good picture on sears parts site. you may try seaching some mower part sites with your carb number and see if anything shows up or you may find a picture searching for manuals. or you may have to call walbro to see if any replacement is available. tim

[larryf]

I found some on ebay but i want to know what the original one looks like cause the one in mine doesnt look like the new one or the original in my manual mine only has about 1/8 to 3/16 of threads on it