Tweet
I have a 1987 Argo 8X8, that has an M-18 (Whalboro carborator) Core motor. I'm trying to find the correct connection (which holes) for the governer spring that connects to the governer and the throttle linkage. Can anyone look at their old M-18 and let me know which holes the spring goes into? Thanks for any information.
-
-
I'd put it on so I could open it wide open. However, if I was to do it so someone else could drive, I would put the spring on the other end.
Who needs a governer anyway?
SlimSlimpickin
You can follow but it's going to hurt -
on the governor arm, put the spring in the 5th hole out from the pivot point. the arm on the carb, it goes to the 2nd or 3rd hole down (the top hole is for the throttle to hook to)A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.Comment
Comment