Anybody got a source for gasket and seal sets,piston and ring sets for the original motor.NCT
							
						
					Announcement
				
					Collapse
				
			
		
	
		
			
				No announcement yet.
				
			
				
	
Superchief Engine
				
					Collapse
				
			
		
	X
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
I found a source.
Here's a link to pistons on eBay.
xenoah chaparral g50b pistons .std thru .080 oversize | eBay
They're great! The guy selling them is very helpful. He also has the gasket sets.Banned
 - 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
You can get gasket sets and other parts from Mfg Supply.
Parts for a all Xenoah G50B Snowmobile | MFG Supply"Looks like you have a problem with your 4 wheeler........you're missin' two wheels there"
sigpic
Comment
 - 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
Ideally getting the G50B up graded with a CDI and fresh pistons would make a nice original machine. Otherwise it depends if you want a historical piece or a trail rider. To make it into a trail rider you will need to upgrade the axles as well as the 4 stroke conversion. Both ways are very desirable.Acta non verba
Comment
 - 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
Its not going to be a trailer Queen but will be kept well,4 stroke conversion not likely in the cards was more thinking along the lines of late model 500 cc leaf blower from a Polaris or Arctic Cat,twin carb,axle upgrade absolutely,wanna keep it as original looking as possible but evil under the hood.NCT
Comment
 - 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
What engine were you running in your Thundercat? 1000cc? I always thought that a built Thundercat triple would be an ideal power plant for a vintage super-modified springer racer like "The Country Bumpkin". That would be a blast for the races in Ashtabula!"Looks like you have a problem with your 4 wheeler........you're missin' two wheels there"
sigpic
Comment
 - 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
Yes its 998cc and built by the wonderful people of Suzuki,three in a row,case reed,when in stock form made 172 hp at some where in the 90 plus foot pounds,heck of a motor,this machine that its in is a original machine lowered for speed runs stock bore but after that its moocho modified tons of fun.NCTOriginally posted by jpswift1 View PostWhat engine were you running in your Thundercat? 1000cc? I always thought that a built Thundercat triple would be an ideal power plant for a vintage super-modified springer racer like "The Country Bumpkin". That would be a blast for the races in Ashtabula!
Comment
 - 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
Nice. I have always wanted to go for a ride on a thunder cat. Got any vids to throw up in chit chat? Id like to see the animal in action! Is it a grass racer? Or lake racer? Back in april i picked up a 800 156 RMK with the VES for 800 bucks. Got one jug at 150 PSI and the PTO side at 120 PSI. I should probably tear into it before i go playing.Originally posted by North Country Tough View PostYes its 998cc and built by the wonderful people of Suzuki,three in a row,case reed,when in stock form made 172 hp at some where in the 90 plus foot pounds,heck of a motor,this machine that its in is a original machine lowered for speed runs stock bore but after that its moocho modified tons of fun.NCTAlaska floating atvs group on face book. Fixing help and trail rides!!!!!
https://www.facebook.com/groups/alaska.AATVs/
85ish Argo 8x8 geo metro engine, hdi axles and 3 bearings per axle.
78 ford bronco... 460 lockers.... "Alaskan tow vehicle"
ATV = Alaska Terain Vehicle
Comment
 



Comment