JLO 2f400-2 recoil WIRING????

[dj3671]

Hey all, I got a buggy with a JLO Rockwell 2F400-2 with none of the wiring hooked up. I have attempted to hook up the wiring but not all the colors match so Im not really sure I am doing it right. The way I hooked it up I got no spark when pulling the engine. Can anybody help???

I have 2 blue wires coming from the ignition coils. In the grouping coming from the block I have 2 blacks, 2 yellow/reds, and a brown. The small square thing has 1 Yellow/black and 1 brown. The ignition has 2 blacks, yellow/black, brown and yellow.

I figured the 2 blacks connect, the browns (ground), the Yellow/blacks are good. I do not know how the 2 yellow/reds, 1 yellow, and 2 blues all work together. Any ideas????

[George]

Try the ST400 diagram on this page. This model had a JLO 400.

http://www.6x6world.com/images/attex-atv/1972-Attex-ATV-Manual-08.jpg

[Bazooo guy]

When connected the 2 black wires kill the spark in the key off position.
Brown is ground.
Yellow/red stripe is ac volts to rectifier
Red from rectifier to battery is 12vdc
Blue/yellow and blue feeds the coils

The engine should have spark and run with the harness from the block unplugged.