Tweet
Do they make an off-set rim for the hustler 5 lug, I think if I go with an off-set then it would give me a little more room with the patch work needed on the body near the rear axle. Or maybe wheel spacers?
-
-
Pretty much every 8x8 5 lug rim out there is a standard 4/4 offset. Wheel spacers would be a good idea. How much do you need to extend them out?"Looks like you have a problem with your 4 wheeler........you're missin' two wheels there"
sigpic -
Look into wheels for a Grass Hopper zero turn mower. they are the same 8x8 5 lug, but have almost no backspacing (1 1/2" I think) and have a decent beadlock on them.A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.Comment
-
Im currently running 22x12.5.8 tires, so Im thinging of dropping down to a 10" wide tire with a 1" wheel spacer. that should puch the tire out enough to allow me to make a mold for the cutch and have a little clearance between body and tire.Originally posted by jpswift1 View PostComment
Comment