Announcement

Collapse
No announcement yet.

max11 adaie track

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • max11 adaie track

    Just got my track kit. Very easily installed. However, you want to make sure you don't turn to quickly on snow covered pavement when you dads truck is in the driveway. God that was close! I have an older Max with the external muffler. One of the grousers did come in contact. Did not hurt anything. Aired up a little more, seems o.k. now. I took her up snow banks that I would normally not attempt. What a rush. I highly recommend them. I haven't had that much fun in a long time. Thank you Mike and Tim.

  • #2
    Originally posted by tattooman View Post
    Just got my track kit. Very easily installed. However, you want to make sure you don't turn to quickly on snow covered pavement when you dads truck is in the driveway. God that was close! I have an older Max with the external muffler. One of the grousers did come in contact. Did not hurt anything. Aired up a little more, seems o.k. now. I took her up snow banks that I would normally not attempt. What a rush. I highly recommend them. I haven't had that much fun in a long time. Thank you Mike and Tim.
    Congrats! Sounds like a blast. Gotta be careful of all large nonmoving objects. lol I now have track envy.

    Comment


    • #3
      blizzard and adair tracks

      Well the blizzard is here in northern new York. The Max is equipped with the adair Max two kit. Nothing stopped me. I have to drive slowly as to not damage anything on my machine. The tracks do make a lot of noise. I know the sound of my machine. Now I have to learn it all over again. Nothing stopped her. I would plow up a bank, lift the plow then drive right over it. Who needs speed when you have this much power!!!!!! I do have a little body sag on the left side. Heat gun will fix that. If there is anyone thinking about a set of them for a max11, I highly recommend them. I fear nothing, except the wife that is. And Obamas policies! !!!!!! Get them on your Max, you will not be sorry!
      Last edited by Mike; 02-08-2013, 05:55 PM. Reason: merged two threads on the same topic

      Comment

      Working...
      X