6x6 wheels bead locks?

[charlevoixboy]

I was looking at rims for my Terra Tiger. All the ones I found do not have bead locks... will these work or will I have to run super high pressures? I'm also in the market for a set of new/used wheels...

[jpswift1]

Regualr 8" wheels would work although not that well. I would highly recomend the K lock bead lock 8" wheels that are sold from Recreatives Industries. Amphibious Six-Wheel Drive All-Terrain Vehicles: MaxATVs - Call 1-800-255-2511 Their wheels are actually made by Kawasaki and I have never lost a bead since running them on my machines, even at super low pressure.

[charlevoixboy]

I called them and they're $53.80 ea. I'm not looking to spend that much but I'm positive they work as you said.

[wildtexasranger]

Hey

Get a hold of Matt. HE sales,& builds the Mudd-Ox. He has the 9" rims and they are k-rims.(BLACK)I bet he could help you out with some really great rims.

[charlevoixboy]

I'll look into that. Right now I'm not looking for something special just a set of rims that will hold air with 21-11-8 tires.

[jerrynuss]

You can use a set of regular no bead lock wheels and use adhesive on the bead and use screws to screw the bead to the rim.

[charlevoixboy]

Yeah but then I'll ruin my wheel and tire.

[artist1018]

Bought my spare rim at TSC=Tractor Supply Store. Just take a rim in to get the right lug pattern. $11.00 each for an Argo!!

[charlevoixboy]

A week ago I called my TSC... they said that they didn't even carry those rims and that they would cost $25 and up to special order.

[artist1018]

Try TSC.com and see if you can order. I'll go to my local & get a part #.

[Cougar]

Thanks

Try TSC.com and see if you can order. I'll go to my local & get a part #.

Thanks Cougar

[jerrynuss]

Why would adhesive and screws ruin the wheels and tires?

[artist1018]

Here is the info from the shelf sticker at my local TSC:
8x3.75 5 lug
4.8/5.7-8
stock numbers:
0303408 & 596451
$19.99 ea.

I either bought mine on sale, or it was miss marked!?! I got one last fall for $11.99.
Hope this helps those of you who need an affordable rim for a spare or a set.

[charlevoixboy]

So the rims you bought were 3.75" wide?

[Roger S]

Richard Clark has some 8" wheels he advertises as beadlocks, but they are not. Don't know the price. Gene Lintz an argo distributor had a source for 8" wheels too, a little wider than the 7" wide argo wheel.