10" wheels????

[ganding]

I wanted to hear everyone thoughts on running 10" wheels on my 945hk I am removing the hubs with the 5x4.5 bolt pattern and installing 4x110mm hubs all the way around so I can use more common atv wheels so pro's con's???

[amphibious drew]

My main concern would be a quality bead lock. John Deere uses a klock 5 bolt 10" rim. You may want to just consider their rims rather than swapping everything over. You nailed the advantage...more options. The disadvantage would come if you ran a 21" or 22" tire. You would be loosing sidewall. My guess is your booing to run a 25" tire, which would provide which would be slightly better than a 22" tire on an 8"rim for ride quality due to a bigger sidewall.

[ganding]

yes sir I am planning to run 25x11x10 mud lights if my math is right there should be 6.325 side wall cushion with 3 psi as far as beadlocks I am going to be doing some chin scratching on this one but I do know a man with a water jet table?????

[6 WHEELS OR BUST]

I have 10 " polaris rims with 24" gators for my 950. Recstuff has a 10" x 6", 5 on 4.5" wheel very reasonably priced. If i had this to do over i would consider them as the gators are very flat when compared to the original rawhides. The skinnier wheel may be the way to go.

[ganding]

this is my thoughts after talking to some folks last night I can run the 4x110mm front rims which are 8" wide roughly and I will have no problem with rubbing on the tub granted my foot print will be a little narrower but that could help in trail riding